Posted in

Kotobukiya 1/100 Knights of Sidonia – Ichinanashiki Morito Tsugumori Hakugetsu Kai – Review

Damn, that’s a long ass title.

The "Ichinanashiki Morito Tsugumori Hakugetsu Kai" is the lead Guardian (mecha) from Tsutomu Nihei’s popular Knights of Sidonia manga (soon to be CGIhorific anime) piloted by lead character Nagate Tanikaze. It’s the first model from the series, is made by Kotobukiya, and retails for about $50 USD + S&H. At 1/100 scale she is anywhere from 8 to 11 inches tall depending on the positioning of the backpack.

I’ve read a bit of Knights of Sidonia, mainly to help support Vertical Publishing, so bear with me if I don’t have all of my terminology in order. read more

Falldogby Falldog••0
Posted in

MG RX-78-2 Gundam Ver. 3.0 – Review – Updated 5/16

[flickr-photo:id=9518389519,size=n]

Welcome to my review of Bandai’s latest Master Grade Gundam model, the RX-78-2 Gundam Version 3.0. The redesigned kit takes after Bandai’s new and improved vision of the original Gundam, matching the giant statue in Tokyo and the previous Real Grade release. While it features a more traditional frame than the RG, the MG is, for better or worse, simply a scaled up version of its little brother.

I should point out that I don’t have a RG RX-78-2 so I can’t compare the two directly. While I could compare the RG and MG based on other RG kits I figure it be best to make most of my comparisons within the same product line. Though I will reiterate that the MG and RG look exactly alike (other than the size and some panel gap issues, more on that later), even down to the included markings. Between the Mega Size, Real Grade, and Master Grade it wouldn’t surprise me if Bandai re-released the Perfect Grade in this scheme as well… anyhow, I digress… read more

Falldogby Falldog••0
Posted in

Attack on Titan Part III (Episodes 5-13): Attack on Tighten

Ironically, my previous Attack on Titan posts were long but dealt with short mini-arcs, while this post will probably be shorter but deals with the longest arc in the history of anime.

It’s just that I don’t have a ton of stuff to say about Defense of Trost. It had a couple of major plot twists and some terrific emotional moments, but it was really drawn out both in terms of plot and production values. By the time we hit episode 13 (which was the ninth episode of the Trost arc), the telltale signs of an unfinished product were readily apparent. 13 clearly went to air with several sequences unanimated and masked by cutting away to static scenery shots while still hearing the sounds of the battle (the audio post production is probably tracked to unfinished visuals so you could still hear the sounds of what they animated, but the animation itself was absent). On that front it feels a little weird to judge it now, because clearly the home release will be at least somewhat better. Strangely enough, this same sort of thing happened last year with Psycho Pass, even forcing the creators to issue a public apology for the quality of episode 18, but in the case of Titan, I didn’t really see that type of outrage. read more

neontasterby neontaster•
Posted in

Pre-Shading Experimentation

I haven’t been taking a break from modeling as much as slowly destroying one of the best kits Bandai has ever released, the Master Grade Zaku II 2.0. This one, specifically, is a Johnny Ridden version that’s been in various stages of completion since at least 2010. Just recently I decided it would be the perfect sacrifice for practicing new techniques and generating new tutorials. It was recently the testbed for The Army Painter primers, pla plating, option parts, and now, pre-shading. read more

Falldogby Falldog••0
Posted in

OR Joint Review – Man of Steel

Falldog: Thanks for checking out Otaku Revolution’s review of The Man of Steel. Normally we don’t do movie reviews around here (not sure that we’ve done one ever, actually) but Neon and I felt that in light of the poor critical response that we take the time to write up our commentary on the film. We both liked it. I thought it was fantastic and way better than this year’s Iron Man 3. And I’m saying that as a long time Superman fan.

And guess what! This review is filled with a fuckload of spoilers! Stop reading here if you haven’t seen the movie or don’t care. read more

Falldogby Falldog•
Posted in

Layman’s Gunpla Guide – Pla Plate Tutorial

Welcome to the pla plate tutorial, where Gunpla starts needing some expert level craftsmanship. Now, don’t get me wrong, pla plating at it’s simplest isn’t too difficult to manage. It’s when you go down the rabbit hole of customization that time, patience, and skill really comes into play. More of that later, for now, the basics.

Pla Plates

Pla plates, short for plastic plates, is the term generally used by gunpla modelers to refer to what’s commonly known as styrene sheeting. Styrene, a type of plastic, is a preferred material produced for modelers looking to scratch build or customize their projects. It’s fairly common and applies to many hobbies, most commonly model trains, making it quite common in hobby shops. In the United States many shops feature a shelf with plates from Evergreen Scale Models or Plastruct. read more

Falldogby Falldog••0
Posted in

Dragon Ball Z: Rock The Dragon Set Is Coming

 

Three years ago, I caught whiff of a possible English dub for Dragon Ball Z Kai done in the frosty North, by the Sasquatch-breeding Canadians at Ocean Studios. For three years I have waited with bated breath, my eyes opening to the day with fresh hope that the dulcet tones of Doc Harris would course through my ears with "Stand by for Dragon Ball Z… Kai!", only to be struck each day with a sense of unrelenting defeat (moreso than usual). Eventually, I had no choice but to settle into a remarkably steady indifference, puncuated by the occasional glimmer of curiosity (and something somebody in the know told me). read more

Penguin Truthby Penguin Truth•
Posted in

Metal Gear REX – Finished

[flickr-photo:id=8835433185,size=n]

 

After about two weeks of painting and delays my Metal Gear REX from Kotobukiya is finally finished. It was certainly a nice change of pace from working on Gunpla and I’m really glad how things turned out. REX really is a fine kit and I feel like I treated him well. For those interested in a full review of the kit, or to see the before photos, click here.

When it came to the colours I wanted to go with something realistic and fitting for REX but outside the normal gray & green. I started with four types of Tamiya grey. The blueish tone of one I didn’t fully realize until after I did some painting. At first it looked a bit bright but after lining and top coat it calmed down and thing looks great. The full list is XF-20 Medium Gray for the camouflage pattern, XF-66 Light Gray for the colour, XF-19 Sky Gray for the lighter parts of the inner frame, and XF-63 German Gray for the dark parts of the frame. For the details I used some X-11 Chrome Silver and X-12 Gold Leaf. A bit of red was used for the launchers and the yellow lines are a random mixture of yellow and gray. The lenses were coloured with Tamiya’s TS-72 Clear Blue spray can but backed with silver to give them that reflective nature. read more

Falldogby Falldog••0